By Zhou Xiaowei, the marketing department of SmartGen
- Power generation control mode
Load mode selection for the power generation control mode, when the remote start input on demand is valid, the unit starts, synchronous closing soft loading, output is set the active power, reactive power or power factor. When the remote start is invalid, the unit soft unloading,open and shutdown.
2. Mains control mode
Load mode selection for the mains control mode, when the remote start input on demand is valid, the mains input power is greater than the set value, the unit starts, synchronous closing, power soft loading, according to set the mains load power value, beyond themains, the part of the electrical power setting is made up of the power. When the remote start is invalid or the load is less than the mains power setting, the unit soft unloading open and shut down. The mains control mode must be connected to the mains CT.
3. Load receiving mode
Load mode selection for the load receiving mode, when the remote start input on demand is valid, the unit starts, synchronous closing, power soft loading, power all transferred to the power generation side, the mains close. When the remote start is invalid, the mains anti-synchronous closing, power generation all transferred to the mains, power generation open and shut down. The load receiving mode must be connected to the mains CT.
Note: This mode applies to port units.
4. AMF control mode
After the failure of the mains, the mains open, the unit starts with the load. After the mains is normal, the mains anti-synchronous closing, power soft unloading, the unit automatically shuts down.
5. Islandingcontrol mode
Remote start island mode is valid, the unit starts, synchronous closing soft loading,mains opening. Remote start island mode is invalid, the mains anti-synchronous closing, power soft unloading, the unit automatically shuts down.
For more products and cases, please visit www.smartgen.cn