At present, there are two main types of PC-level dual power switch in China: motor driven isolation and electromagnetic driven. Now we will introduce you a few suitable automatic switching control modules for the motor drive isolation SOCOMEC and the domestic equivalent dual power switch.
Economical Cabinet Installation Type–HAT163 Dual Power Control Module
1. Three types of installation : guide rail in cabinet, screws in cabinet and pannel installation;
2. It is simple and convinent for the short connection distance inside the cabinet;
3. With the detect funcitons of overvoltage, undervoltage, overfrequency, underfrequency, phase shortage and inverse phase sequence;
4. Panel LED can clearly display the ATS working state;
5. It can realize one-way main use, two-way main use, automatic switching and automatic recovery, automatic switching and non automatic recovery.
Simple Pannel Installation Control Module –HAT530N
1. Silicone mask, better performance at high and low temperature;
2. The output contact of the genset is always closed, so there is no need for external DC power supply;
3. Programmable relay is configured to control power supply switching of ATS;
4. Normal delay and abnormal delay of the power can be set;
5. With the detect function of overvoltage, undervoltage and phase shortage.
High Cost Performance–HATC60 Dual Power Control Module
1. 100ms quick switching
2. 132×64 LCD display with two languages (CN & EN);
3. It can collect and display two-way three-phase voltage, frequency and phase sequence;
4. With the functions of overvoltage, undervoltage, overfrequency, underfrequency, phase shortage and inverse phase sequence;
5. With the function of historical record, 200 pieces of data can be cycled;
6. With the function of regular inspection and starting /not starting at fixed time;
7. Two genset can be controlled to realize cycle operation, active-standby operation and time-balanced operation;
8. Standard RS485 isolated communication interface, ModBus-RTU communication protocol, with remote control, remote signal, remote regulating functions, which can remote control geneset start, stop, close and open of the remote control switch.
SmartGen has more than 20 years of experience in design, development and production of dual power switch control modules, and our products are widely used in subway, hospital, data center, intelligent buildings and other occasions. We have various series of products, which can adapt to PC, CB, CC level of different brands of dual power switch. For more information, please go to www.smartgen.cn or download the APP “SmartGen products” for more details.