HMU15N controller is used for the remote monitoring of single or multiple gensets (up to 10 sets) controller.It can realize remote start/stop, auto/manual mode transfer, close/open operation and real-time data monitoring, alarm display, data curve, event log and other functions. It has three-level operation authorization, which is flexible to configure and simple to operate.HMU15N adopts Android operation system, which can communicate with genset controller via RS485 port or ETHERNET port.
HUM15N Function and Characteristics
1.Apply ARM processor, 15-inch capacitive touch screen LCD (1024*768 resolution), Android operation system, optional Chinese and English interface;
2.With power indicator and alarm indicator;
3.With multi-level brightness adjusting, which can auto/manual adjust;
4.Built in range sensor, the brightness can be automatically reduced to the lowest level when no one is in front of the display screen;
5.With 4-way RS485 communication port, 1-way CAN port, 1-way ETHERNET port, communicate with master control module via 4-way RS485 or ETHERNET port;
6.Master/slave USB port, firmware upgrade, software upgrade, data export functions;
7.Remote monitor single or up to 10 gensets;
8.Real-time display genset parameters and alarm information;
9.With real-time data curve and historical data curve and can be exported;
10.Real-time clock display, operation history and alarm record function and can be exported;
11.Alarm unit stops with one button;
12.Expert Mode (Engineer permission only);
13.When range sensor is enabled, if there is no person within 1.5 meters in front of the display screen for 60 seconds, then the screen brightness will drop to the lowest;
14.Screen display and touch test: Tap or slide the screen to display the touch point. Tap the screen for 5 consecutive times to exit the test;
15.Three-level user permission: operator, technician, engineer;
16.After connecting USB, click the export operation, you can export event log to the root directory of the USB as a csv file;
17.Page switch bar: click to switch homepage, genset detailed information page, expert mode, setting page;
18.Genset name can be user-defined;
19.Can remove or add modules;
20.With alarm mute function;
21.With alarm indication, communication status indication, close/open indication.
HMU15N Parameters
Front Panel Description
Interface Display
Expert Mode
Event Log
Data Analysis
Parameter Configuration
Typical Application
