Recently, a gas power station project with total 48 gas units in Xinjiang was successfully delivered and put into use. During which the HGM9580 bus parallel control module and HGM9510 multi-machine parallel control module of SmartGen were applied in this control system.
For the power station or the complex system of multi-stage bus, using HGM9580+HGM9510 can realize the parallel connection of up to 512 geneset units, and realize intelligent scheduling, load sharing, non-important load tripping and other functions.
48 Genset Units Parallel SLD (Single Line Drawing) of A Power Station in Xinjiang
HGM9580 bus and bus parallel control module is suitable for manual/automatic parallel system of multiple gensets bus and mutiple gensets bus. The controller synchronizes two busbars through MSC CAN bus. When the synchronization condition is satisfied, the bus connection switch closes and the two busbars run in parallel.
HGM9510 genset parallel control module is used for the parallel system of multiple gensets of the same capacity or different capacity, as well as for the constant power output of a single genset and grid connection with the mains supply. The control module has the control functions of GOV and AVR, and can automatically synchronize and load sharing. This power station project only uses the multi-machine parallel function of HGM9510.
